Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: 12 string

  1. #11
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    7,426
    I've used a basic drill stand with a normal drill to do it very well, just setting it up to drill through the hole at the bottom of the stand. Use the bridge holes as a template for marking the positions on the top, then drill the two E string holes all the way through and the four inner holes 2/3 the way though. Then turn the body over, use the two E string holes to line up the bridge, then again use the bridge holes to mark the 4 inner string hole positions, and drill those through about halfway until the holes line up. That way your top and rear string holes should be in a nice straight line.

  2. Liked by: Barry snook

  3. #12
    do Gotoh make a TL 12 string bridge? i can only find this one

    https://www.allparts.uk.com/products...teel-saddles-1

  4. #13
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    7,426
    I thought they did, very similar with the full Tele baseplate.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •