Hi Guys,
The kit finally arrived (Aust Post are miles behind in Melbourne)
Did the stocktake of parts and tried a test assembly only to discover I'm missing the neck pick up -whoops!
E-mail sent to PBG have to wait until Monday for response but I'm sure the missing part will be dispatched promptly only for Aust Post to hide it from me for another month!
Started the sanding today, I'm using rattle cans to spray the primer, solid colour and clear coat.
With Basswood body, my research tells me to start at 180 grit which I did followed by 220
Now I'm finding conflicting info as to where to stop before primer is applied
The PB video says use 180, 600, 1200 but some research I've done says, 180, 220, 240, 320, 360, 400
Advice please?
Another interesting thing with my kit is that the second fret measures 42mm same as fret 1 and fret 3 is 45mm
It was noticeable to my eye that the 2nd fret is short at the high E tip
Is this a problem for intonation/fret buzz?
I can't seem to edit my photo to fit the required format sorry to show you