It's finished, aside from a couple of parts I'm waiting on. I've been waiting for a ZerO Glide nut that I ordered for this two months ago - still no idea where that is. But I started this so long ago, I forgot I bought a Tusq nut so I've temporarily put this in. I've filed it down a bit but I still need to work the slots and get the strings lower as open chords sound horribly out of tune. Also waiting for a Pure Tone multi-contact jack (more potential to screw up some soldering).
Still got all the neck work to do but I'm just going to let it settle for a bit while strung up before I do all that.
Details:
AGM-3F - Mahogany body with mahogany neck and ebony fretboard.
Upgrades/kit deviations-
* Tonerider AC4 neck/bridge set
* Tonerider AC2 neck in the middle position (may experiment with running this out of phase but standard wiring for now)
* Gotoh Magnum locking tuners
* SixStringSupplies CTS pots (thanks Adam)
* Switchcraft 3-way switch
* Chrome/metal pickup surrounds
* Some ugly volume/tone knobs that looked a lot better in the website photos and might get replaced at some point
* Home made cavity cover fashioned from some 3mm ply (I hate plastic)
Will get some audio samples up when I've finished all the neck/nut work and got some decent strings on it (the last two sets of Ernie Balls I've got with my kits seem to have corrosion on the unwound strings and are quite lumpy)