Mandatory "Sorry if this has been asked before/posted before" but there's a whole lot of posts up here =P
Finally got around to starting my build. Its an EX-7 String.
Sanded down the pieces a bit and then glued the neck to the body. Installed the tune-o-matic and tuning pegs to get to work on the intonation/action/etc. Gonna do the p'up install after this.
My issue is that there were no string trees in the box and was wondering if i'm after doing something wrong. My high-e is waaaay off and doesnt sit in the nut at all (I can can file that down later on if needed, no worries).
I've gone off and gotten some string trees from a local shop, but decided to post here in case someone can tell me that its a bad idea before i screw one in for my high b and e strings.
If anyone's built one of these 7's before, i'd love to know if you guys experienced this as well. Or if anyone with more experience (So... anyone) has had a run in like this before, i'd appreciate your help =)