Can anyone give me any tips on how to remove this bubble from the veneer? It’s not really noticeable from the front but I thought I might try and repair it before I carry on with the build.
Sent from my iPhone using Tapatalk
Can anyone give me any tips on how to remove this bubble from the veneer? It’s not really noticeable from the front but I thought I might try and repair it before I carry on with the build.
Sent from my iPhone using Tapatalk
what i have done on a previous build is re-glue using a needle and syringe ( about 2bucks at chemist) you can inject either a watered down woodglue or superglue between the veneer and the base wood then clamp down and let set.
Tony
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
I’ve also gone the needle and syringe method also. The only thing I would add is, “are you staining the guitar?”. If so, might be worth staining first if you feel the glue might inhibit staining? Just a thought.
1) ES-5V
https://www.buildyourownguitar.com.a...highlight=Es5v
2) ES-3 (Custom)
https://www.buildyourownguitar.com.a...ead.php?t=8953
3) GR-1SF (Custom)
https://www.buildyourownguitar.com.a...ead.php?t=9376
4) Non-Pit Bull Travelling Guitar.
https://www.buildyourownguitar.com.a...ad.php?t=10303
5) AES-1 Special (Unwanted Custom)
https://www.buildyourownguitar.com.a...ad.php?t=11118
...though if you do, check for glue marks first and try and remove those.