So after finishing all the body work on my GS-2Q kit I’ve run into a little problem. When I glued in the neck I checked the scale and it looked spot on, but now doing my final set up I can’t get it to intonate right. I think what has happened is I’ve glued the neck into the pocket a little too far forward towards the bridge) making the scale just a little too short. When trying to set the intonation I have to wind the saddles all the way back towards the tail piece and can only get a couple of the strings to intonate right. I need to move the saddles back further on some of the strings but it’s hard up against the back of the bridge. So my question to the brains trust is what can I do about this? Do they make a bridge that has a few more mm of adjustment that’ll fit this guitar? This site has been an amazing source of help and inspiration so thanks again to everyone
Sent from my iPhone using Tapatalk