Sent from my iPad using Tapatalk Pro
Sent from my iPad using Tapatalk Pro
Last edited by FrankenWashie; 06-06-2020 at 04:53 PM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
I'm just wondering if the tops might be a little too thick to resonate well enough to get a good 'thump' sound. You can but see and you can always thin it down if necessary.
Whoa, that looks amazing!
And I think that the 1/4" top is more than enough. I agree with Simon it needs to allow vibrations through to the microphone on the other side. But since this is all new to me, I don't know for certain.
I should get the amp stuff wired up in the next few days to test the electrical side of things.
FrankenWashie, I see you are building your own. Do you want me to build a piezo preamp in a box to send up to you? Or do you have something suitable already?
Mantra: No more pedals, must finish BlueyCaster...
Disclaimer: I haven't done woodwork since high school, and wasn't really paying attention at the time ...
Okay if anyone is curious as to why it takes the FrankenLab forever and a day to get anything done, here is a good example.
We’ve got 3 or 4 differing thickness QMaple blanks to use as the skin for these two stomps. We hard right turn and slice up some rock maple into 4mm boards and laminate two together just ‘cause we got curious as to how that would sound.
We also chewed up an hour and a half because we had this idea about slicing up some merbau strips and using them as inlays in the corner of the stomp boxes, cause y’know, why not!
ps: DC where do you want your jack mounted? Front of box or side or other?
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
I am simultaneously laughing at your description of getting distracted, and gawping in admiration at your workshop as glimpsed in these photos.
Jack to the rear please, just where it looks like yours is drilled.
Mantra: No more pedals, must finish BlueyCaster...
Disclaimer: I haven't done woodwork since high school, and wasn't really paying attention at the time ...
So some progress shots, here is the DC stomp in progress
The Lab stomp is now mostly complete, bar the piezo discs, which I have now been advised won’t get here until August. In the interim I’m going to have a crack at mounting an old pick up in it and seeing how that goes.
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Fine skills there Boss