ES-335 kit - Marze build #3

[McCreed]

Good thing you took a picture of it now...

'cause it will never look like that again!!!

[Marze]

Also in some not so bright news, the replacement neck arrived and this one has different faults. The is an over saw cut on the top edge of the neck to body cut out, annoying as it will be the corner you see when you look down on the guitar when playing.


and the heel is not flat.
Not sure if it is obvious in the photo but the is about a 1.5 mm gap at the pickup cavity end of the heel. Not sure if clamping and glueing will hold it down flat.



Sent from my iPhone using Tapatalk