Very cool man.
Very cool man.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
And it's done. I normally run compression after drives, partly on the idea that it preserves the pick sensitivity of the overdrive, but also because I have been using the digital compression built into the THR. Putting the Lemon Squeezy at the front, just after the buffer and tuner. I can use it as a compressor-boost thingy into the overdrives. Or at least that's the plan for now.
And on the board (which still has room for the Red Llama and Phase 45 that I will be building once parts arrive). Once they get built I will probably evict the Pure Sky (Sweet Baby has already left the building):
I like the idea of running a board only with pedals I built myself, but I won't ever build a tuner or looper, and the Xtomp is too much fun (right now it's at the end of the signal chain just before the looper - that way I can use it for distortion, phaser, chorus, delay etc).
Let me know if you need a Red Llama PCB. I've got a spare
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
No worries mate, its a pretty simple circuit
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Sorry just saw this. The thing about the Red Llama is that it sounds different depending on the amp used. Based on that, I'd say its a very powerful overdrive which is capable of what you have described. Obviously you can use it as a clean boost with fairly minimal colour to the tone. When you start playing with the gain you can start at crunch, which increases to a driven marshally type sound. I've not spent a lot of time in the really high register of the gain so i'll check later today.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1