Applied the first cost and still sticky after 4 days. What to do ?
Applied the first cost and still sticky after 4 days. What to do ?
Patience is the key.
DT has no chemical driers so you have to wait for it to cure. If you put too many coats on wet you'll muff it unfortunately.
I usually, at a minimum, wait 7 days per "thin" coat but if its really humid or cold you may have to wait 14 days between coats.
Which DT have you got Layne?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1