While waiting for paint to dry I decided to refurbish the enclosure for my BYOC OD-2 (it's a modded TS circuit with a clean boost in the same case).
Here's why:
Step 1: unboxing. I had to cut the three wires from the power jack, but that's a simple fix
Step 2: heat gun, wire brush and a lot of elbow grease later:
Step 3: SCA filler primer left over from my TL-1TH kit:
That's as far as I got today. The plan is to respray with duplicolor red with a couple of white stripes, ala the classic Dodge Viper scheme. And the handwritten labels will be replaced with waterslide decals (ordered some sheets from Dr Decal and Mr Hyde today for the TL-1TH headstock).