Results 1 to 9 of 9

Thread: The one rasp to unite them all

  1. #1

    The one rasp to unite them all

    Hi everyone

    I have more or less decided I will try and shape my headstock with a rasp. However, as I don't want to build a collection of rasps .... what is the 1 (or 2) I should buy that would cover most of this and any future needs?

    I'll probably order it from Bunnings.

  2. #2
    This is the only one I use.
    Does headstocks, arm and belly cuts.
    Click image for larger version. 

Name:	rasp.jpg 
Views:	163 
Size:	390.4 KB 
ID:	34422

    cheers, Mark.

  3. #3
    Overlord of Music FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    4,980
    I would get a Shinto Rasp and a coping saw.

    Name:  s-l300.jpg
Views: 233
Size:  5.9 KBDepending on how much shaping is required, the coping saw is your friend to get the bulk of the work done and the Rasp for refining the profiles. The Shinto rasps are dual sided, a coarse cut for fast material removal and a medium side to refine the rough cuts. In practice you should be able to go straight to 80 grit from the medium side, at least that is what my experience has been.
    The only Caveat with that is that due to its length and width, it can be problematic to do tight concave shapes.
    Once your profiles are cut, then you can begin the joy joy task of SANDING!
    FrankenLab Guitar Experiments.
    Making bad ideas a reality since 2016!

  4. #4
    Mentor McCreed's Avatar
    Join Date
    Oct 2018
    Location
    AUS
    Posts
    1,009
    At the very least I would follow FrankenWashie's advice of a coping saw then some form of rasp.

    I have an aversion to hard work so I can't imagine doing a headstock completely with a rasp. One day I'd like to get a scroll saw, but for now I use a jig saw, drum sander (in drill press) and finish by hand.

    Stanley Coping Saw at the BGS $18.99 - worth every penny IMO. If I couldn't at least have a coping saw, all my headstocks would look like paddles

    Like this:

    Click image for larger version. 

Name:	AST-1SW-08.jpg 
Views:	153 
Size:	51.6 KB 
ID:	34424
    Making the world a better place; one guitar at a time...

  5. #5
    Nicholson make a 4-in-1 rasp (8" long, 2 tooth sizes, one flat side, one convex side), but I found a version that's 12 or 14 inches long, in a local builders providers. I gave one to a friend a few years ago to help with bow making. The 8" Nicholson doesn't really hog material away.

  6. #6
    Thanks everyone for your response. I was wondering if I could get away without a coping saw? If I do the standard strat shape ... is there a lot to saw away?

  7. #7
    All I used is a straight hand saw and marked out the most straight cuts to trim it down.
    The rest was tackled with the rasp followed by sand paper.
    Unfortunately I don't have the money to throw around on tools.

    cheers, Mark.

  8. #8
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,781
    I cut headstock with a coping saw and then use 80 grit sandpaper. I rarely use a rasp for anything.
    Current:
    GTH-1

    Completed:
    AST-1FB
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Open D/Standard Double 6 twin neck

  9. #9
    Mentor jugglindan's Avatar
    Join Date
    Sep 2019
    Location
    Canberra
    Posts
    669
    I used a coping saw followed by a round and half-round rasp (depending on the curve radius) and then sanding. Mark's method of straight cuts --> rasp --> sanding also works. Just spending more time with the rasp.

    For rasps, I bought a three pack quite cheap - round, semi-round, and flat.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •