Hi! This is my first kit from Pitbull guitars. Today after a long month of delays I got my kit. I will start dyeing it tomorrow. I chose rit dye Purple and Blue, and I'm going to put some oil on top to make it darker and to make it smooth. I think I will install an amp card from some Vox headphones, or I will install a raspberry pi 3 mini computer to run the amp/preamp software, or I will run them passive. I'll remove the tone pot as IMO it's useless, and I will install a DPDT switch to change the polarities of the pickups and one DPDT switch to wire the pickups together in series or parallel.
Reply With Quote
