Results 1 to 4 of 4

Thread: Is DT final coat final?

  1. #1
    Member SamSquare's Avatar
    Join Date
    Dec 2018
    Location
    Melbourne
    Posts
    65

    Is DT final coat final?

    I guess itís just the bewildering array of finishing options thatís confusing me but Iím just wondering what the recommendation is for DT final coat.

    Is this the very last thing that goes on the guitar before assembly and playing the thing, or do people apply anything else like wax or polish? (Or does that lead to being sent to the naughty shed?)


    Sent from my iPhone using Tapatalk

  2. #2
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,421
    DT Final coat is the 3rd layer of finish in the DT process (base stain, Intensifier, Final Coat).

    From my not so good experience with the stuff it should be similar to layers of top clear coats as if applied by wipe on poly, sprayed acrylic, wipe on Tru Oil, etc.

    The tricky part is not getting too many built up tacky or not fully cured layers, and never, ever be tempted to use 0000 steel wool to do any scuff sanding as that stuff can quickly ruin everything if still the slightest bit green/not fully cured.

    You needs lots of patience when using DT.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  3. #3
    Member SamSquare's Avatar
    Join Date
    Dec 2018
    Location
    Melbourne
    Posts
    65
    Ok, so the only thing it needs after the final coat is time, right?


    Sent from my iPhone using Tapatalk

  4. #4
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,861
    Yes Sam, in a nutshell you are right.

    I usually put on one very thin layer at a time and leave at least 7 to 14 days drying time per coat. After about 3 to 4 layers, I will gently wet sand with 600 grit for smooth out then 1500 grit being very careful not to sand through to the intensifying coat. I then repeat the above process until I get the final layer that I want.

    I can say that I've never actually achieved satisfaction for me personally as I prefer a harder final coat such as tru oil. But that's my personal preference.
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •