Hi,
I have received an ATL FB/15 as a present. I have measured the inside of the nut to the middle of the 12th fret and have measured 324mm. Apparently this is what I should have been expecting. I’ve then measured that distance from the middle of the 12th fret to the middle line of the guitar body and tried to line up the supplied bridge saddles to sit at that distance. From what I can tell, the bridge piece will need to be in a position such that I will need to rout more of the wood of the body.
My question would be, where do you measure to on the bridge saddles?
Also, there seems to be contradicting information from Pitbull in how to set up the saddles when measuring. In a video it is suggested they should be as forward as possible but in the PDF manual it suggests they should be in the middle. Any definitives?
Thank you
Laurie