Still doing research before I start building.
Does anyone know the pros and cons of lacquering the tweed?
Still doing research before I start building.
Does anyone know the pros and cons of lacquering the tweed?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
The pros are that it keeps the tweed clean otherwise it can pick up a lot of dirty marks. Can't think of any cons. I recently varnished a tweed amp with a brushed-on single coat of water-based poly varnish and that was easy enough to do (and I could do it inside).
You can of course use a tinted lacquer to make it more yellow, like Fender do with their lacquered tweed cabs, but clear will provide protection if you want it to look more subdued.
Don't forget to remove the grille and all the other fittings first.
Good points, thanks Simon.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Uncle Doug just recently uploaded a series of youtube videos about the Oscilloscope and how to use it to trace out the signal path of an amplifier, definitely a must watch series.
Hey Andy, how's the build process going?
Thanks for the interest Doc. I'll definitely check out uncle Dougs vids. This year I'm getting absolutely flogged at work so I am hoping Ito get some time off at Easter to put this together. I have been checking out https://www.evatco.com.au/
for some pretty good quality amp parts. next time I think I'll just make my own cab and get the parts from there.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Still on the information gathering stage as I'm a bit of a bookworm. I have to wait until Easter before my sparky helper is free anyway. I've ordered some books which I will give a review on one received and digested.
Found this nice video though, hopefully it will inspire someone else to give it a go as well.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Yep, that's a great video Andy.... Some quite essential points covered however many critical points completely overlooked.... The main point I think they missed is the feeling you get when you play through an amp that you have built, but I also think the little jam they have more than makes up for it in spirit...
Builds-
#18 PBG GSH-1R https://www.buildyourownguitar.com.a...ad.php?t=10236
#17 PBG PBA-4 https://www.buildyourownguitar.com.a...ead.php?t=9984
#16 PBG IB-1Q http://www.buildyourownguitar.com.au...ead.php?t=8754
#15 PBG TLA-12 http://www.buildyourownguitar.com.au...ead.php?t=8444
#14 PBG PRS-1H
#11 Scratch build AC15 clone headhttps://www.buildyourownguitar.com.a...ead.php?t=7686
#09 PBG ES-1TL
#07 partscaster Alder Denim Tele.
My new book arrived today!!! Nerd excitement!!!
Sent from my Pixel 3 using Tapatalk
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1