I applied darker tone pore filler to the body,
then I sanded it back to make the grain have more contrast and it turned out like this:
I like the subtle contrast with the neck:
I used water based filler paste and mixed it with a bit of water to thin it and make go into the tiny pores.
Somewhere it worked well, while other places it did not work at all it seems, there are still some of those tiny open pores of ash. Anyway, I decided to put the shellack on it.
My question now: should I apply the shellac separately on the body and the neck or glue them together first and apply the shellack afterwards?
No hard and fast rules here for that. I like to give the neck and body at least a couple of coats before attaching. My thinking is that it makes it easier to clean up glue squeeze out. Just keep the neck join free of finishing product.
1) ES-5V
https://www.buildyourownguitar.com.a...highlight=Es5v
2) ES-3 (Custom)
https://www.buildyourownguitar.com.a...ead.php?t=8953
3) GR-1SF (Custom)
https://www.buildyourownguitar.com.a...ead.php?t=9376
4) Non-Pit Bull Travelling Guitar.
https://www.buildyourownguitar.com.a...ad.php?t=10303
5) AES-1 Special (Unwanted Custom)
https://www.buildyourownguitar.com.a...ad.php?t=11118
Thank you @DarkMark, it does make sense.
Today I prepared the shellac, 300ml alcohol + 70g flakes. I sat down to read about shellac and watch some videos about it, (amazing stuff!) and all the while I was shaking the bottle. After an hour or so, the stuff completely dissolved. [a few very tiny filaments remained only] Much faster than I expected...!
Looking good.
Never used that type of finish so cannot provide any meaningful advice.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
That is looking very fine, Lappa.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent