Kandy coats on and remarked ready for topcoats.
There’s a touch up need to do on the neck by the headstock. Primer seeped and scratched off on the stain. Need to flat it back and re satin.... bugger.
Sent from my iPhone using Tapatalk
Kandy coats on and remarked ready for topcoats.
There’s a touch up need to do on the neck by the headstock. Primer seeped and scratched off on the stain. Need to flat it back and re satin.... bugger.
Sent from my iPhone using Tapatalk
'Duffus' would make a good headstock logo name.
Woah!!!! That top coat went on mad!!! Leaving and returning tomorrow.
The beast has now been rechristened by a friend.....
‘Sexual chocolate”
Sent from my iPhone using Tapatalk
bit of video showing the clearcoats. This has had at least 4 coats. then a light "nib" then another 7 coats. I'll now leave this over the weekend to harden. then give it a good nib and flat (it doesnt need much... i dont think by then i hope) then another final coat then Ill remove the tape whislt its soft.
I noticed DUFFUS mark 2... that half way through the clearcoats i'd missed masking a part of the neck!!! no idea how that happened!! so there might be some overspray.. shouldnt be too hard to fix the satin...
its looking amazing and i'm really pleased with how its going... sorry for the 360 quality. I did film this in 4k so mot sure why its only showing up in 360...
Last edited by BuffaloGhost; 15-02-2019 at 07:15 PM.
Looks unreal, like a glass of coke bubbling away.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Today was about unwrapping the masking. There’s a couple of areas I’m gonna have to flat and recoat on the body and neckbut on the whole it’s ok.
Now I’m going to leave it to harden up for a few
Days.
Sent from my iPhone using Tapatalk
Woooooooo, SEXUAL CHOCOLATE!!
Looks utterly spectacular BG!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Absolute dynamite! Leave it as long as you can before you start the next stage.
Looks unreal.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Everything is drying and hardening up. I need to address some spots on the body with a touch of overspray. Nothing too mad just needs a touch of a sand and a touch up.
Sent from my iPhone using Tapatalk
Reply With Quote
