Yep all pre-cut Woks. You're right about how stain plans. Waz's idea of natural look is now in my head. I also like black idea....
http://cdn2.bigcommerce.com/server44...0.1280.jpg?c=2
Yep all pre-cut Woks. You're right about how stain plans. Waz's idea of natural look is now in my head. I also like black idea....
http://cdn2.bigcommerce.com/server44...0.1280.jpg?c=2
Current Projects
#Planning 5 String Bass
A long time between posts on this one.. the body has been sanded to 320 and I have decided to go shellac. 3x sealing coats applied, sanded back and feels nice and smooth. Now for 50 million super thin coats.
The grain already looks awesome
Sent from my Moto G (4) using Tapatalk
Current Projects
#Planning 5 String Bass
Lookin great Ponch, I had considered a plain finish but the dark lord forbade it, er I mean I wanted it to be similar to my JR. I also considered a headstock inlay then very nearly ordered an inlaid truss rod cover. Great minds and all.
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Cheers Dedman. I must say that your themes are awesome especially your green burst on the ES5. I was going to tobacco burst but thought it was about time for a shellac based project
Sent from my Moto G (4) using Tapatalk
Current Projects
#Planning 5 String Bass
Lookin good ponch....see you after 50 zillion shellac coats....
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Here's the sealing coat on the back.
Procedure. Sand 180, 240 and 320. Leave the sawdust in place. Then pile on the shellac and rub in with 400 grit wet and dry. Once dry (24hrs min) sand back almost to bare wood to form the grain filled base for more thin coats
Sent from my Moto G (4) using Tapatalk
Last edited by andrewdosborne; 11-10-2016 at 06:06 PM.
Current Projects
#Planning 5 String Bass
Coming up nicely Andrew. Will it get a bit darker as you put on more coats or retain that lovely honey colour
Tony
Cheers vh the front seems to be as dark as it gets so the back will only has a bit to go colour wise
Sent from my Moto G (4) using Tapatalk
Current Projects
#Planning 5 String Bass
Does the shellac get sanded on in granular state or as a liquid? Sounds like liquid and is a similar method that can be used with TO but never tried as that stuff can get quite sticky, particularly on a warm, hot or steamy day. Imagine shellac might be similar in going off tacky really quickly?
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8