wow Tim looks sensational, wait till you get noise out of this baby, awesome kits !
So you got to wire up the pre-amp ?
wow Tim looks sensational, wait till you get noise out of this baby, awesome kits !
So you got to wire up the pre-amp ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Amazing job Tim. She's looking amazing! Bring on the sound demo!!
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
I did, but there's a short or a bad solder joint somewhere. Probably my ham-fistedness at play when I put it in./<\\/p>[]<\\/p>/Quote from wokkaboy on August 31, 2014, 18:45
wow Tim looks sensational, wait till you get noise out of this baby, awesome kits !
So you got to wire up the pre-amp ?
I'll get the multimeter out in the next few days and have a poke around.
Tim I had trouble with my pre-amp earthing on the copper shielding on one of the circuit boards above the pots. I ended up having to scrape some of the shielding away so it didn't make contact
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
It's looking great Tim.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Wokka, one trick I have been using is to cut a bit of milk bottle plastic to use as a bib to fit around the top of the pot to keep the terminals away from the shielding. Might have worked well for your pre-amp circuit board too. Just a thought..
Cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Posting Permissions
Reply With Quote