Page 8 of 8 FirstFirst ... 6 7 8
Results 71 to 75 of 75

Thread: Just fixed my Ibanez TS-808 pedal.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by Simon Barden View Post
    That trimpot may just need a squirt of contact cleaner, rather than replacement. Worth trying that first.

    It's not so much that, it's one of those miniature blue plastic PCB -mounted trimpots that has a white plastic centre where the adjustment screwdriver goes, basically over the years I've had the Scope the white plastic screwdriver adjustment centre for the trimpot got a bit worn so that the trimpot has gotten hard to adjust, but yes I could try giving it a spray with contact cleaner.

  2. #2

  3. #3
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by Simon Barden View Post
    Ah, I see. Well, if you can get to it - replace it!

    For sure, I think I should be able to get a replacement for it from Jaycar Electronics with not too much trouble, might be a good idea to see if I can find a service manual for the Scope on the internet, as it is, the Scope is still quite useable as a piece of test equipment.

  4. #4
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Hahahaha....

  5. #5
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    My Scope has a couple of useful functions built into it, it can be operated in X/Y mode which is useful for checking phase, and it also features a component tester function.

Page 8 of 8 FirstFirst ... 6 7 8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •