Looking nice Gav - but is the neck pup a little Julia (left of centre)? I can't tell if it's loose or if it's parallax that's giving me the "not quite right vibe".
Looking nice Gav - but is the neck pup a little Julia (left of centre)? I can't tell if it's loose or if it's parallax that's giving me the "not quite right vibe".
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
I can see what you mean as well, but I find it hard to judge in photos of guitars that have carved tops.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Haha, no, it's dead straight and dead square....
I run two 600mm rulers from the neck at 90 degrees to the frets before fixing them to the body. Might just be the light. Also remember that they are recessed at the moment and will only be set once the strings are on!
Gavmeister
yes never question the intonation master Gavmeister !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
yeah! That's right!
or he might change your posts to look like this....
/<\\/p>[]<\\/p>/Quote from Fretworn on January 9, 2014, 10:08
I promise to send all my guitars to Gavmeister and Woks for safekeeping./<\\/p>[]<\\/p>/Quote from Brendan on January 8, 2014, 22:54
I promise to send all my guitars to Gavmeister and Woks for safekeeping..
The dowel plugs glued into place and then drilled to receive the machine heads. Nut shaped and marked in preparation for the baritone Strings!
The saddles on the bridge i purchased privately had only the thinnest grove, so these had to be filed to size to (as opposed to only worrying about the nut) ! Double work! Mutter, muttter!
wow thats come up a treat Gav, can't wait to hear this one
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looks like it's almost there Gav. Really hanging out to hear those low vibe tones. I love some of the 'surf' tunes done on a baritone. It's going to be so cool.
And here she is.....
Posting Permissions
Reply With Quote
