hows the action on the strings Bec ? I'm hoping to glue the neck on the same model axe this weekend
hows the action on the strings Bec ? I'm hoping to glue the neck on the same model axe this weekend
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep you've nailed that finish Bec, nicely done;-)
sweet as, looks so good now, the colour and with the binding. gonna be amazing this one
I'm no pro, but the action is looking pretty good. Didn't have to mess with the neck position much at all. Had a fair bit of trouble with the bridge though 'cause one of the pre-drilled holes was about 2mm off. Still, managed to get everything in place with some... gentle persuasion (mallet) :P
Looking awesome Bec! Coming down the home straight..
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Awesome work Bec.
Gavmeister
Shielded and earthed... so shiny! :P
This is all class, Bec, very well done
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Yep, this is looking ace. Tidy work.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Nice copper shielding job Bec. Beware you may have to scrape some of the shielding off where pot lugs may make contact. I've had to do this to a few builds where the pots are recessed, especially the top two neck pots are recessed deeper.
I presume the yellow wire is an earth wire from the bridge posts ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote