Page 6 of 11 FirstFirst ... 4 5 6 7 8 ... LastLast
Results 51 to 60 of 110

Thread: Tristans FV-1

  1. #51
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    Yup, I used four hundred to remove the stain and then steel wooled it and that worked quite well. Thanks Gavin for the help, I've noticed that removing the stain from the neck binding was far more difficult than the body and I suspect that it will cause me problems after the base coat is ready. (pics soon I promise )

  2. #52
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    First base coat applied, it's starting to look pretty good.
    Starting to see why people here swear by wudtone, as it's been far easier than my attempts at lacquer finishing, and is looking better.

  3. #53
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    Btw, those neck holes are the same as on the neck mounting holes on the body, they were drilled in a strange place on the body. I'm considering re-drilling it.

  4. #54
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    They are a tad wonky... But I wouldn't worry about it as there is bugger all string tension and there is no way that the screws will give out on you.

    Plugging those holes requires a bit more than a roughly shaped dowel, you need a proper plug cutter to be sure of a stronger than the parent timber fix.

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  5. #55
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Having said that, the above is true as long as the neck mounting plate doesn’t over hang the edges of the neck/ body.
    If it does, then we have a work around to sort you out

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  6. #56
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    The mounting plate is fine, I didn't even realize that they were off until I had removed the neck. It doesn't really worry me and doesn't seem to structurally be an issue as you said.

  7. #57
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    Unfortunately I haven't been able to add any more coats the last three 'cause I kind of lost my steel wool. I found it under the television in my parent's bedroom (not gonna question that) and I have now applied the 3rd and second last base coat. Pics to follow this evening.

  8. #58
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    MMMMkay... best leave the question of why the steel wool was found there well alone

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  9. #59
    Member
    Join Date
    May 2013
    Location
    Brisbane
    Posts
    89
    Just ordered my guitar shop starter kit and 12' radius sanding block from stew-mac.
    If you can guess what why I stole a bone off my dogs today you'll win an amazing prize!
    (not really)

  10. #60
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Bone nut!!!!
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

Page 6 of 11 FirstFirst ... 4 5 6 7 8 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •