Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 33 of 33

Thread: New guitar day today.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member I値l give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    263
    Quote Originally Posted by DrNomis_44 View Post
    Cheers, I've been working on getting my playing style to go in a more bluesy direction, playing the blues is a lot harder than most people realize, my hat is off to all the original blues guitarists.
    I did totally agree, blues is a lot harder than I thought. But I知 enjoying the learning.


    Sent from my iPhone using Tapatalk

  2. #2
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,552
    Two sets of Fender standard tuners arrived in the post today, I had ordered them from The Stratosphere, the tuners on my Fender Strat were getting a bit worn out so I decided to order two new sets a few weeks ago, the new set of Fender standard tuners I put on my Mexican Telecaster seem to be doing the job well, making the guitar relatively easy to keep in tune, I'm out of strings at the moment so I'll have to buy some new ones next week to get the Strat up and running again.

  3. #3
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,552
    I finally decided to swap out the stock pickups in my Mexican Telecaster for the Tonerider Hot Classics in my custom Butterscotch Blonde Telecaster, there are two reasons why I decided to do that, firstly I found that I was playing the Mexican Telecaster more than the custom Telecaster, and secondly I do like the Tonerider Hot Classics more than the stock Fender ones, I did also notice that the Toneriders do seem to work better with my Marshall amp's overdrive channel as well, and seeing as the Mexican Telecaster is going to be one of my main gigging guitars along with my Fender USA Strat, I'm going to spruce it up a bit by replacing the stock scratchplate screws and 3-way pickup switch with the ones from the custom Telecaster, I can always buy new hardware and pickups, etc for the custom Telecaster at a later date, besides, I'm going to be replacing the custom Tele's neck with a better one at a later date anyway.

    Just had a quick look in the neck pocket of the Mexican Tele's body and yes, it is indeed made of solid wood and not plywood.
    Last edited by DrNomis_44; 15-04-2019 at 06:03 PM.

  4. Liked by: wazkelly

Page 4 of 4 FirstFirst ... 2 3 4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •