Page 4 of 10 FirstFirst ... 2 3 4 5 6 ... LastLast
Results 31 to 40 of 95

Thread: November Guitar of the Month

  1. #31
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    What this month lacks in numbers it makes up for in serious quality. Great work fellas. Almost glad mine's not gonna be ready. Almost.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  2. #32
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    so think this is the 5th entry this month. This is my entry, LP-1M mahogany body and neck.
    Popped the flames on the body with a black stain, then finished in Dingotone Coolangatta gold. Back, sides and neck finished in FW jarrah stain. About 8 coats of tru oil over the entire guitar.
    Headstock veneer is blackheart sassafras. I purposely ran the grain horizontal to match the flame on the cap. Truss rod cover is cut out of camphor. Bone nut cut and slotted.
    Pickups are tonerider Generators sound great. Got push pull pots to coil split both neck and bridge pups. Hoping I get a bonus half a point for getting Wayne's dog Odie in one of the photos !


    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #33
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    headstock and back photos


    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #34
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    I was wondering which one of your latest masterpieces you were gonna enter. Well there you go Wokka and his elves do it again, another 4D stunner. Love it man:-)

  5. #35
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    cheers Barge, I got at least 2 others ready to enter but waiting to see how many more entries are coming in. The 4D elves have been busy ! haha
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  6. #36
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    wokka, that is one stunning LP, great work.

    I think December GOTM will be massive in numbers, thanks to the last sale

  7. #37
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    cheers Stan, you're not wrong, I predict at least a dozen entries for December, there's a lot of build diaries getting close to finishing
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #38
    nervous anyone?...the judges perhaps?

    very slick looking guitars

  9. #39
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Dave just think how the regular judges feel end of the month they have to do this all the time !
    Looks like there's a blue Ricky bass being entered soon too to make it even tougher to judge!
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #40
    Hey guys, here is my ib7
    candy red over marble with a black burst top, black back and sides, 2k clear. Neck is satin clear with a black head stock face.
    Electronics are a stock 3 way, switch craft Jack, cloth wire, push pull volume to tap both pickups which are dimarzio custom blaze 7's in both the bridge and neck. Logo work by andyport and truss rod cover by some champion on eBay.
    Currently running the stock trem and nut but thinking I'll change the trem to one I can use a d-tuner with. I'll try to get a video demo up today also. Cheers!








Page 4 of 10 FirstFirst ... 2 3 4 5 6 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •