Thanx Lawry,
Still undecided as to what finish to put on the fingerboard...
The Rock Maple is plenty hard enough, especially as I only use flat wound strings so I may stain and wax it.
If I don't stain I will flood it with thin superglue, this makes it hard as!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Part of me was wanting this to be an April fools - it's looking amazing - loving the surf curl at the base of the fretboard. But now I'm going to be wanting something just like it... What sort of wood is that?
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
The body is Fiji'Hog, Brendan..as stocked by Pit Bull
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
oh DB, sorry for suggesting you would use a pickguard, I was assuming a Ricky 4001 bass has a pickguard but wasn't thinking straight !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hahaha! You are forgiven Woks.
Normally the 4001 does have a p...p... you know what, so your assumption is accepted as an honest mistake
You can hang onto your get out of the naughty room card a while longer..
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
awesome thanks DB, I'll be using the card to get out next time we run out of beer in the naughty room !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Why don't you just buy a brew kit for the naughty corner? Problem solved. You may end up having to knock people back from wanting to get in.
haha great idea Lozza, your'e right it may get too busy if we got a surplus of beer, so we better keep a lid on it, pardon the pun ! If the naughty room gets expanded we may be able to set up a small micro brewery with a keg filler, save on filling bottles !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Ya reckon I could start a 'naughty' franchise in Nth Qld?
maybe Lozza, you would have to consult with the naughty master DB. You would need someone to manage the people in the naughty room and how far to the nearest Pit Bull builder to you Loz ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
