Received my sixth PB kit mid-June. First glance a challenging set of wiring!! Three switches and metres of wiring (just kidding). Did a fair bit of sanding to remove the rough edges and gave it a coat of white undercoat. Applied sand sealer and then sanded the two necks. Chose some Black Japan prooftint and then varnish with about three coats followed by some Truoil. Happy with the necks, Three coats of Wildfire red on the body. Then came fitting both necks and the truss rod covers. Laid out some wiring to get a hang of the possible sizing through the many holes pre-drilled in the body. Then today used the supplied coloured wiring to lay out the routing of them.
Reply With Quote