It does look good...also nice choice on the bone nut too
It does look good...also nice choice on the bone nut too
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Looking great. I love the color I bet in natural light it looks different without the purple hue. But I think you are gonna have me sweet jb.
Thanks for the comments guys - really looking forward to seeing it all come together now. Next step shielding.
Looking very cool Jed!
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Not too often that the end stain result turns out how you intended as the colour swatches are close but never truly accurate. All part of the exciting discovery phase of DIY guitar builds. Once you add hardware and scratch plates to provide some contrast it may look a bit different too but hopefully something you are happy with.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
So here's a mock-up of the body - the pick-guard and hardware definitely helps - also helps overcome the visual issues with having so many different grain patterns due to the number of pieces of wood that contributed to the body. Have completed the addition of shielding foil. Just waiting for the neck finish to fully cure, and the arrival of the bone nut so that I can complete the set-up process.
Doing the bridge alignment thing with 2 pieces of string and that temporary plastic nut.
I've gone with the kit tuners for now - I'm holding off on any further upgrades until I see what sort of result I get on the initial build.
Well it's all together, and looking pretty good I think
Just awaiting the arrival of that bone nut and some dingo wax to finish off the fret board and then we get to see how good a job I did of leveling those frets. Fingers crossed. All of the grounding has good continuity, and I've been able to verify connectivity of the PUPS and correct operation of the vol and tone controls so it's all looking fairly promising.
nice job Jed looks great. Have you used all stock hardware ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yes. I thought I'd stick with the kit hardware for my first build to see what sort of result I get. Might look at some more esoteric options for the next time around.Originally Posted by wokkaboy
May even do some upgrades on this one if I really like how it plays
Posting Permissions
Reply With Quote