Oh sweet... Yeah it has the final coat in it, so will use that. Cheers Wok
Oh sweet... Yeah it has the final coat in it, so will use that. Cheers Wok
Current Build:
GR- 1SF http://www.buildyourownguitar.com.au...ead.php?t=4817
DB07 have you got enough stain coat left for one more coat ? (Remember that first coat is 2-3 times as thirsty as subsequent coats.
You may find as your first coat was heavy that it may only need one more coat. The DT should get a bit darker as it cures as it takes time with no drying agents
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
The colour is looks great! Interested to see how the colour develops as it dries. The top coat should also deepen the colour.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Current Build:
GR- 1SF http://www.buildyourownguitar.com.au...ead.php?t=4817
Just an update, Adam and Dingo are absolute legends. After emailing them, was able to get some more first coat of the Karijini Red sent out, which arrived yesterday, so I could do a 2nd or 3rd coat. My guitar has been sitting there, curing for nearly three weeks, and I can already see it has darkened slightly, so It's in good shape to get the the mahogany colour I want.
Current Build:
GR- 1SF http://www.buildyourownguitar.com.au...ead.php?t=4817
Current Build:
GR- 1SF http://www.buildyourownguitar.com.au...ead.php?t=4817
So, looking at putting the first intensifier coat on.
Does it need a little sand back before I do this?
Current Build:
GR- 1SF http://www.buildyourownguitar.com.au...ead.php?t=4817
Hi DB07, if there is any build up give it a light rub with super fine steel wool. If not then go ahead with next intensifying coat
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I don't think using Reschs Pilsener as an intensifier coat will work.
Last edited by Fretworn; 05-04-2016 at 11:41 AM.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
haha Fretty you are on fire todaz !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in