Hey all,

There have been a few questions in regards to the bone nuts I cut for PBG.

1. Width. I deliberatly cut the nuts slightly wider to compensate for any variations in neck at nut width.
This also allows the customer to do their own end shaping.

2. Height. I do cut the nuts high, again, this is to let the customer adjust the nut to their own preferred action height.
The slots are the correct depth, any material that needs to be removed should be taken off the bottom of the nut.
This also allows for angle adjustment as well. (Higher at Bass end, lower at treble)

3. Slots are not evenly spaced. I cut the slots to compensate for the differing string gauges.
This compensation gives a more comfortable playing spacing.