yes Ben you need 4 wires at the other end to coil split. Scott may be able to help you modify the pickup to be able to coil split it
yes Ben you need 4 wires at the other end to coil split. Scott may be able to help you modify the pickup to be able to coil split it
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
It looks like those white wires are the series links (that is, the wires that link the two coils), but we need a look at the ends of those red and black wires to be sure.
If you just want to split the coils, rather than do any parallel or phase change shenannigans, then you'll just need to connect a single wire on each of those link joins, you won't need to separate them. But first, post up some pics of the red and black wires, where they connect on the pup and their ends, and then we can work out what you need to do.
Scott.
Posting Permissions
Reply With Quote