Yes, I did that Wokka./<\\/p>[]<\\/p>/Quote from wokkaboy on September 26, 2014, 14:39
did you do that technique AJ ?
sounds like a good idea
Yes, I did that Wokka./<\\/p>[]<\\/p>/Quote from wokkaboy on September 26, 2014, 14:39
did you do that technique AJ ?
sounds like a good idea
Projects:
LP-1A
TL1-A
LP-1Completed
TL-1Completed
Yamaha rebuild: Completed
Mako -Scratch designed: Completed
PUP winder: Completed
Facebook : www.facebook.com/andrew.johns.1272010
Skype: andyjohns1
cool thanks AJ, what colour timbermate went well on the ash?
I'll try it next time
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I used a cedar/cypress red with a touch of pine blend matey.
Projects:
LP-1A
TL1-A
LP-1Completed
TL-1Completed
Yamaha rebuild: Completed
Mako -Scratch designed: Completed
PUP winder: Completed
Facebook : www.facebook.com/andrew.johns.1272010
Skype: andyjohns1
cheers AJ
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looking amazing AJ! Keeping my eye on this one. She's gonna be killer!
Cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
I was just thinking, when I saw you had sanded through the cap, WHERE????? That Timbermate trick is not etched into memory! Good move AJ! And awfully glad to hear you are back on your feet mate!
Gavmeister
thank you all for the great comments, it will be a slowish build in between lots of rests and the doc's visits. I just hope this goes as per my perceived vision for it.
Projects:
LP-1A
TL1-A
LP-1Completed
TL-1Completed
Yamaha rebuild: Completed
Mako -Scratch designed: Completed
PUP winder: Completed
Facebook : www.facebook.com/andrew.johns.1272010
Skype: andyjohns1
Welcome back - hopefully sanding and staining a guitar could go down as "light exercise".
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
Looking good AJ. Very interested to see how the candy goes.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Have done a little more to the new Ash LP, with the candy coats. They are a little rough atm, but will sand back to get the imperfections then re-coat with the candy colors then clear coat to finish up. The clear coat will "pop" the candies. the center color is a copper shade with the burst outer a mauve red.
Projects:
LP-1A
TL1-A
LP-1Completed
TL-1Completed
Yamaha rebuild: Completed
Mako -Scratch designed: Completed
PUP winder: Completed
Facebook : www.facebook.com/andrew.johns.1272010
Skype: andyjohns1
Posting Permissions
Reply With Quote
