Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast
Results 11 to 20 of 47

Thread: LP-1M Build

  1. #11
    real nice, the colour really shows off the figure in the wood

  2. #12
    Love the headstock!

  3. #13
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Thanks for the positive feedback.

    Small update on progress, I have since applied 2x more coats of Goldenrod to the flame maple and it continues to 'pop'. Bit of a disaster with the Wudtone mahogany on the body (especially around the sides). Take up was uneven, wood appears to have 'burnished' in places (especially on the convex curves) and did not take the stain as well. I have sanded back with 180 and planning next move. I'm thinking Wudtone deep base over the 180 sanding to get a nice deep penetration, then light sand 220, another coat of Wudtone deep base, then see how it looks. The Mahogany grain seems quite tight.

    More piccies to follow soon..
    Current Projects
    #Planning 5 String Bass

  4. #14
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    thats a bummer Andrew on the sides that aren't taking the wudtone. Sounds like a plan the 180 grit should rough up the surface enough to let the wudtone take in. Post some progress pics to see how it looks
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #15
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Prepped the sides for re-Wudtoning, along with another coat on the back and neck. Sides took the Wudtone up lovely this time, and looks even with the back and no lighter burnished areas around the sides, phew... 180 grit did the trick.

    The lighter part in photo below is due to my camera flash. Overall the Mahogany has a lovely golden hue to it in the light. When time for top-coat I may use a wipe-on poly or Tru-Oil it up to get a nice depth and gloss to the finish..



    Current Projects
    #Planning 5 String Bass

  6. #16
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Some more pics. Also had a nice surprise today, received my bottle of Tite-Bond and Kluson tuning pegs in the post :P

    Must pop into Magnum Sports on the way to work tomorrow to pick up some Tru-Oil


    Current Projects
    #Planning 5 String Bass

  7. #17
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Those colours look great together. Very nice.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  8. #18
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    very nice results!

  9. #19
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    well done Andrew that mahogany looks fantastic on the back/sides, nice contrast to the golden rod cap.
    Whats the Feast Watson can in one of the photos ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #20
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Ah, that was used to oil our deck over the weekend. I've never tried on a guitar!
    Current Projects
    #Planning 5 String Bass

Page 2 of 5 FirstFirst 1 2 3 4 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •