Results 11 to 15 of 15

Thread: First build GSM-1 Mahogany

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    First build GSM-1 Mahogany

    Hi all,

    i introduced myself in the section for that in the forum, but i can sum up quickly
    First builder of the GSM-1 Mahogany kit that is my nice birthday gift, I'm french living in Italy

    I contact you because I have some questions that I hope are small issues!

    I got issues to upload pictures so i will put links only, sorry for that

    First, this is my kit :
    https://imagizer.imageshack.com/img924/4149/wQVoPV.jpg

    1- When fitting the neck in the pocket, I got this situation :


    https://imageshack.com/i/pmb6GfpHj

    https://imageshack.com/i/pl72mEB8j

    I think I should sand on the sides of the pocket until the heel is completely flat in the pocket, correct ? not sanding at all the neck except before applying the glue, correct ?

    2- I'm not sure exactly where to glue the neck, as the heel of the neck is not long enough


    https://imageshack.com/i/pn71x163j

    Is it normal ? I cannot find any tutorial for that, would you have that ? thanks!

    3- the bone nut that i ordered from Pitbull additinally to the original one, is not the same size and is too small for frets height


    https://imageshack.com/i/poriX8Cqj

    https://imageshack.com/i/poyZs8sfj

    https://imageshack.com/i/plwdQYU0j

    Is the piece correct ? How should I solve this issue ?

    Many many thanks for your help & talk to you soon!
    Have a good day!

    Antoine
    Last edited by Antoine Rad; 11-04-2020 at 10:34 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •