The Not White GR-1sf. It's gone brown burst.

[kells80aus]

good stuff PK looking good

tks Wokka

Cheers PK

[dingobass]

Noice.
If you need it, I have the phone number for the I just wired up a hollow body guitar support group.....

[kells80aus]

Noice.
If you need it, I have the phone number for the I just wired up a hollow body guitar support group.....

It's all cool Db, I have a six pack of beer to deal with the psych issues.... LOL

To tell you how this one is wired.
The selector switch is just chooses pickups Bridge, Neck or both.
The knob next to it is the tone pot, well it's a push pull with two caps wired to it. I don't remember the values, probably .23 and .68uf.
The front pot is Master Vol, and the rear two pots are Individual Pickup Vol Pots.
All the wiring is push back shielded cotton.
The pickups are attached to Seymour Duncan Triple shots, so each pickup coil can be selected individually, or in parrallel(standard), or series.

Now tell me do I need a beer or three

Cheers PK

[andrewdosborne]

It's all cool Db, I have a six pack of beer to deal with the psych issues.... LOL

To tell you how this one is wired.
The selector switch is just chooses pickups Bridge, Neck or both.
The knob next to it is the tone pot, well it's a push pull with two caps wired to it. I don't remember the values, probably .23 and .68uf.
The front pot is Master Vol, and the rear two pots are Individual Pickup Vol Pots.
All the wiring is push back shielded cotton.
The pickups are attached to Seymour Duncan Triple shots, so each pickup coil can be selected individually, or in parrallel(standard), or series.

Now tell me do I need a beer or three

Cheers PK

Hey PK this axe is looking awesome. And for the wiring effort I reckon at least a slab of bier!

[kells80aus]

Noice.
If you need it, I have the phone number for the I just wired up a hollow body guitar support group.....

Hey PK this axe is looking awesome. And for the wiring effort I reckon at least a slab of bier!

Tks AO, and SB

[keloooe]

Noice.
If you need it, I have the phone number for the I just wired up a hollow body guitar support group.....

Does it also include getting a wiring harness like I had for the Frankenpester in a Tele control cavity while nearly burning my hands multiple times requiring many hours of swearing? If it does, pass it on please

[stan]

nice progress PK, you'll be playing it soon mate

[wokkaboy]

Pest you should make up a cardboard template to do the wiring so you're not working in a small cavity and it will avoid burning yourself with the soldering iron.
Good luck with the wiring PK and as Ponch says a 6 pack may be a bit lean !

[keloooe]

Pest you should make up a cardboard template to do the wiring so you're not working in a small cavity and it will avoid burning yourself with the soldering iron.

Yeah but it doesn't solve my problem. Either way its really difficult to get some of the wires done, glad I was able to snag those helping hands thingos, now there will be quite a lot less swearing!

[stan]

just dont set the cardboard on fire , Pest...