Page 13 of 26 FirstFirst ... 3 11 12 13 14 15 23 ... LastLast
Results 121 to 130 of 252

Thread: Pablo's TL-1Q

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    These quilt veneers are way thinner than the flame ones I've seen. That said, it was way too easy. I sanded gently with 180, raised the grain with a damp cloth, sanded with 240 then with 400. I have a feeling the bad one on the top horn was there before I started.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    that orange looks excellent Pabs, can't beat orange and black theme like the hemi Chargers !

    @ Andy you would have to sand pretty heavily to sand through a spalted cap are probably 2-3 times thicker than these paper thin quilt tops
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #3
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    sounds like a wise plan Waz, I wouldn't sand the veneer at all
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #4
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Thanks Woks. Everywhere I read it all seems to end in tears as the caps are so thin.

  5. #5
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Seems someone might have cleaned up (thrown out) about $60 worth of pickguard blanks I had stashed at my workshop. Bugger.

    EDIT: Oil stage is done and curing. If I can sort a pickguard alternative, it should be going together this weekend!
    Last edited by pablopepper; 27-01-2016 at 07:15 AM.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  6. #6
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    what Pabs, one of your co-workers through out pickguard blanks, has the bin been emptied ?

    so aren't you using the provided pickguard ? is it black or do you want another colour ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #7
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    That's about it Woks. Bin was emptied over a week ago. Long gone.

    I just wanted a plain 3 ply black/white/black, alas I got the bare bones option kit therefore no supplied pickguard.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  8. #8
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    bummer Pabs, hope there was no mirror pickguard blanks tossed out. Hope you gave that person a right bollocking !

    nice, black/white/black pickguard will look cool
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  9. #9
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356

    That'll do.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  10. #10
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    looks awesome Pabs, did you need to route the bridge pup cavity north 5 or so mm on this kit ?
    you going the speed dials on this one ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Page 13 of 26 FirstFirst ... 3 11 12 13 14 15 23 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •