If you go with a transparent pickguard, you better stain the front pickup hole.
If you go with a transparent pickguard, you better stain the front pickup hole.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Hey Fretty good advice but knowing Ponch he will probably copper shield the cavities
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
This is something I've been thinking about. As much as I love shielding staining the cavity would be the way to go. So then question is black or jarrah...? (same question for the bridge pup cavity)
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
Hi Ponch, I used Black Conductive Shielding paint on my Ash J Bass and it really helped to accentuate the grain popping. Wimped out and went with the supplied white scratch plate but was all set to order either a silver mirror finish to tie in with all the chrome or maybe just a clear. Was scared off by the potential untidy look of wires hanging around underneath. Maybe one day I will revisit as traditional scratch plates hide way too much of the Ash grainy goodness.Originally Posted by andrewdosborne
Hey Ponch, wait and see what colour clear pickguard you choose, then maybe you can do some samples to see how it looks. Black cavities won't highlight the electronics very well
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Slow progress with the rain but almost finished polying the body (satin) . Headstock decal designed for application later...
Sent from my GT-I9506 using Tapatalk
Last edited by andrewdosborne; 08-06-2016 at 06:07 AM.
Current Projects
#Planning 5 String Bass
Looking very nice Ponch. Hope your Headstock logo has Ponch sitting on his kwaka?
The color is pretty close to DBs rosewood stain he made for Andy40s Tele
Last edited by wokkaboy; 08-06-2016 at 07:17 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Cheers Wokks, nothing too exciting with the decal, 3 letters in fancy writing there is a story behind it....
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
Nice job so far....that grain in the body looks intense!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Final coat done, I'll leave this a while to cure before bolting all together...
Neck and decal also done and.. no speed bumps, no fret levelling required
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
Posting Permissions
Reply With Quote
