Page 11 of 16 FirstFirst ... 9 10 11 12 13 ... LastLast
Results 101 to 110 of 155

Thread: Ash Strat Reset

  1. #101
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Another coat of Gloss goes on. Pretty sure this was number four..

    Cheers PK
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  2. #102
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    looking pretty nice Paul

  3. #103
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Hi Stan,
    Tks M8.
    My gold bridge turned up today as well as the gold pickup screws. Just need to find someone with a pair of gold 5pos switch screws.

    PK
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  4. #104
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Well ebay as a source of gold strat switch screws Sucks. can get a pair from US for nearly $20.... BWAHHHH might just buy a can og gold modeling paint.

    PK
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  5. #105
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    there is a great nut and bolt shop near me, i can have a look, alternatively the big green hardware may have some that might work

  6. #106
    This would have to be one of the warmest (aesthetically) guitars on the forum.
    I reckon gold pickups are the right choice to enhance that body. I'd imagine the rest of the hardware is gold too?

  7. #107
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Hi Maxaxe

    At this point I am looking to put on a black sealed humbucker to go along side the two black rails.
    I do have a stack of old gold pickups I could put on her.
    I've also wired the bottom tone pot exclusively to the humbucker with a push/pull to select between a .023uf cap and a .047uf cap. The pick up is only around 8k and is only a 2wire job.

    Cheers PK

    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  8. #108
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    pickguard front
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  9. #109
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Pickguard wiring
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  10. #110
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    Ok Just noticed a new feature on that humbucker pickup , basically it's scratched so it's out of there.
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

Page 11 of 16 FirstFirst ... 9 10 11 12 13 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •