Thanks again guys, still pretty amazed really. Hey Weirdy, if you're reading this, I swapped my .022uf cap out for a Sprague .047mfd in the hopes that I could get the tone control working but still to no avail, any ideas mate?
Thanks again guys, still pretty amazed really. Hey Weirdy, if you're reading this, I swapped my .022uf cap out for a Sprague .047mfd in the hopes that I could get the tone control working but still to no avail, any ideas mate?
If you followed that SD wiring diagram then the tone should have a noticeable effect with either cap, so there must be something dodgy. It could be a bad/incorrect connection or possibly even a dead/cooked pot. Maybe post some pics of your wiring in your build diary, specifically how the tone is connected, and the collective intelligence can take a look.
Last edited by WeirdBits; 06-11-2014 at 09:29 PM. Reason: I kan speell gewd
Scott.
Congratulations to you all!
Big congrats to all the entrants this month. They were all sterling efforts and in any given month each of them could have won. Great job guys!
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/