Originally Posted by wokkaboy
Hey Doc, just checked the DT sanding kit comes with:
1 Sheet of 180 Grit Sandpaper
1 Sheet 0f 220 Grit Sandpaper
1 Sheet of 240 Grit Sandpaper
1 Sheet of 320 Grit Sandpaper
1 Sheet of 400 Grit Sandpaper
you have to supply the elbow grease
No worries then, that saved me from having to do a stint in the Naughty Warehouse, when I go to sanding the body and the guitar I might start off with the 180 grit and then work my way up to the 240 before I apply the Ebony TM, then when the TM has dried enough I'll sand it back starting with the 220 grit and work my way up to the 400 grit, this is going by what I've read in other build diaries.
The headstock on the neck will have some sanding done to it to smooth it out a bit along the edge where I used my 8mm rat-Tail file to shape it.
And for sure I'll have to supply a good decent amount of elbow grease, as the saying goes "No pain, no gain".
Reply With Quote