looking good Mulldoe
looking good Mulldoe
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Alright, the headstock is just about ready for a final polish.
That's a sweet looking finish there Mulldoe!
nice looking headstock and logo Mulldoe
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Get close to time for a shred now, got a couple of coats of what may or may not be a particular type gun stock oil.....
Final assembly coming soon!
Mulldoe
Cheers mate
Hey Mulldoe don't rush the assembly, give the TO at least 2-3 weeks final curing - it is worth the wait for it to fully harden before you start polishing and assembling
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
A three week stretch in the NW for using poo oil should give it enough time to cure
Otherwise, that is looking schweeeeeeeet!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
I am so tempted looking at this kit to just go and plonk some cash down. Either this or the SV kit. Dagnabit! Thats another two builds in the plotting now!
Cheers for the advice wokka and db, I am going for a satin finish on the neck and in my experience with t/o about a week is enough time before a hit with steel wool........if it is in low humidity. So that said, fret job.
And let the final assembly begin, neck attached.
Time for machineheads bridge and some strings to tie it all together and..........it's alive!
Tuned and set the trem on this to c# for those nice thumping metal tones, and I gotta say, it sounds pretty sweet. Anyway, cheers for following along all.
Take it easy,
Mulldoe
Posting Permissions
Reply With Quote
