Spent Saturday arvo putting the unfinished TLA-1R together to check all body mods. Took a video with my Iphone of the arvo and put it together with an improv sound test.
Ended up with a little list of more mods to be done. but i'll be moving straight on to sanding and dingotoning!!!
It was hard to say goodbye to her until I'm finished now.
Last edited by Andy40; 28-02-2016 at 11:50 AM.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Sounds good mate, nice and clean.
Thanks Tony, that means a lot to me coming from yourself.
BTW I checked out your FB vid from January, that strat with the sweet burst? Nice groove! but you're wearing a hoodie, in Jan? is that Melbourne weather?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Hey Andy cool video and is that your backing track sounded cool. Nice upgrades all round this beast should sound great !
What colour DT you going for ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Haha no it was probably winter, just didnt upload the thing until a few months later, 30C-40C+ here in January
Thanks Wokks. Yeah just threw down a Bm7 and Am7 loop with a bit of pentatonic over it, I used Guitar Rig 5 just with an interface cable with one of the country twang presets.I think the lead started in the middle position then switched to the bridge than finished in the neck position.
I got a DT custom colour...rosewood...its going to be sweet. Its DT Mk I but i'm hoping to finish the whole thing in DT with a satin finish.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Piccy of the rough assembly....its in pieces now....
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
That grain should really pop Andy
You scored some nice grain with this tele, should come up a treat!
Current Projects
#Planning 5 String Bass
Originally Posted by Andy40
Spent Saturday arvo putting the unfinished TLA-1R together to check all body mods. Took a video with my Iphone of the arvo and put it together with an improv sound test.
Ended up with a little list of more mods to be done. but i'll be moving straight on to sanding and dingotoning!!!
It was hard to say goodbye to her until I'm finished now.
I'm having trouble viewing the video clip, when I click on it I get taken to a blank webpage,I'm guessing that my browser doesn't support the file type....hmmmm....I'm using the most recent version of Firefox in Windows 10.
I might try using a different browser.
Okay, I tried Microsoft Edge and I was able to view the video clip, looks like Firefox has some issue with Photobucket, anyway, I enjoyed watching the video clip Andy40, nice editing and the soundtrack had a cool vibe, the Tele sounds nice.
Last edited by DrNomis_44; 03-03-2016 at 07:10 AM.
Posting Permissions
Reply With Quote