Quote Originally Posted by WeirdBits View Post
Some kits, like the TL-1, have certain connections pre-wired at the factory as the pots/switches are already set up on the control plate etc. On the PBG TL diagram it states at the bottom that the pre-wired connections aren't shown... it's a little confusing when you just look at the diagram, but it makes sense when you have the control plate in hand. Good for new builders, but less so if you're re-wiring/replacing components.

Yes, a bit confusing - I saw the comment on the diagram that said the factory wiring wasn't included but if you don't know what's wired at the factory, you don't know if it's missing or not .
Since I'm replacing the pots and caps I will need the full diagram - the one tonyw posted should be just the ticket.

Peter.