hey Waz, I usually sand to about 240 grit and then apply the grain filler, wouldn't hurt to even go to 320.
The ash grain is quite coarse so it may need 2 applications of timbermate.
Then I hand sand from the same grit to about 360 or 400 is heaps
hey Waz, I usually sand to about 240 grit and then apply the grain filler, wouldn't hurt to even go to 320.
The ash grain is quite coarse so it may need 2 applications of timbermate.
Then I hand sand from the same grit to about 360 or 400 is heaps
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote