Welcome along Plainfaced. Have to agree with you - Pitbull is definately the way to go. As for neck setup - acording to the site, the Luthier's neck setup should come with
Setting the correct neck relief (back bow so when the strings are at tension the neck is straight); and
Levelling, re-crowning and polishing the frets to allow for a super low and lightening quick action with buttery smooth frets.
That should be everything you could want - the neck should then be a dream.

As for kit to do a neck job yourself - Wokka is right - there can be a lot of kit required just to get the frets level - so if you're only looking at one then a neck job can be quite economical - there is quite a bit of work in getting everything right.

Bolt on necks have holes in the body - not the neck - not too hard to do yourself and just needs a drill and a couple of clamps. Personally find them easier than set necks...