Depends what the size is first, I need them a Minimum 30cm L 15cm W....results would be meaningless on anything smaller.

In Dingtones testing case, I would need to grid off a stripe of bare wood first as the control, then subsequent coats of Dingtone in ever increasing layers.
Going by you Video Tutorials- I'd need say 7 of these, then do the intensifier 1-7 over those, so 42 grids, then how they looked un waxed, then waxed.

That's why the sheets need to be like half a Strat sized, in a regular Striped Maple figure.

Depends how much they cost as well.....If you guys only knew how much I've thrown at these 3 kit guitars before I've even begun sanding [ I've had them 3 months ].....I don't really mind.

I just want great results,I've been doing a LOT of research, and gathering the tools for what I WANT to do -a lot nobody NEED's [expensive part] and if I can help other get great results in the process....well that's made it worthwhile.