nice one Gav, kit looks very nice and the fingerboard grain looks wicked.
So you bought it for your birthday or did the minister ?
nice one Gav, kit looks very nice and the fingerboard grain looks wicked.
So you bought it for your birthday or did the minister ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
The minister did!! And here am I with a quite substantial exiting stackOriginally Posted by wokkaboy
.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Wow! She's a keeper.The minister did!! And here am I with a quite substantial exiting stack
cheers,
Gav.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Gav, when I put my RC-4 together moody asked me to do a mock-up with the stock bridge, I used a Ric replica bridge. In the pic the saddles are pretty close to where the other bridge's were. Couldn't find my measurements, but should give an idea where it will sit on the body.
Grant
Posting Permissions
Reply With Quote