That's looking pretty spectacular, Andy!
I appreciate your frustration with the humidity... it's just dropped to 78%, and we were hoping to put some paint on the young bloke's MB-1 today.
That's looking pretty spectacular, Andy!
I appreciate your frustration with the humidity... it's just dropped to 78%, and we were hoping to put some paint on the young bloke's MB-1 today.
1st build - Blue ES-12G ->-Build Diary-<-
2nd build - Father/Son collaboration MB-1 ->-Build Diary-<-
3rd build - GR-SF1 ->-Build Diary-<-
4th build - FS-1 ->-Build Diary-<-
thats looking nice and shiny Andy, looks pretty close to me !
Those micro mesh pads will get the TO nice and flat, but give it 2-3 weeks final curing or you may have the problem Pabs had the TO hadn't fully cured.
Surely this axe will be good enough to hang on a wall in the house somewhere !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks guys.
@swanny...I hope the humidity drops enough for you, but not sure if thats going to happen!
@wokks...thats what i'm aiming for ....straight to the lounge room!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Wow looking nice and shiny Andy. TO does become a little frustrating (at least for me) when you get the shine 98% there and you are just looking for that last coat. Despite that, you seem to have knack. The colour looks amazing and the clear coats are showing it off perfectly.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Good stuff Hey Andy. Glad the mesh pads are doing the trick
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
@ Andy40 Did you end up fixing up that wonky nut shelf in the end?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Ah rightio, if the neck on that ST-1 of yours is a bolt-on neck then I can think of another fix for the wonky nut shelf, just simply replace the neck with another one of the same type.
Cool BTW Doc do you have link to your thread on DIY stompboxes?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Do you mean this one?, this has pics of my pedal builds on it and some sound demos, I don't think I remember signing up as a member at DIY Stompboxes, but, I am a member of Freestompboxes.org.
http://www.buildyourownguitar.com.au...ead.php?t=4615
www.freestompboxes.org
Maybe I should go to DIY Stompboxes and sign up as a member.
Last edited by DrNomis_44; 31-01-2016 at 09:31 AM.