Update:


I've manged to get the 12th Fret action as close as I can to Gibson specs, with the new bridge lowered as low as it can go on both sides the 12th Fret action for both of the E-Strings is about 5/64 Inch, the high E-String should be 3/64 Inch as per Gibson specs but I can't lower the bridge any further since it is hard up against the body on both sides, most likely due to not enough back-angle on the neck, but it's okay with me, I've also got the neck relief adjusted to .012 at the 7th fret, and the string saddles are adjusted for intonation as best as I could, I think the makers of the guitar may have placed the bridge post holes a bit further from the neck than they should have since the D-String saddle is hard up against the bridge trench end.